| | |
|
| |
| | |
|
|
Eneos Fully Synthetic Motor Oil 5W-20
Eneos Fully Synthetic Motor Oil 5W-20
ENEOS 5W-20 Premium Synthetic Motor Oil provides enhanced fuel saving characteristics. It offers an upgrade from conventional 5W-20 and satisfy drivers who seek improved fuel economy.
ENEOS 5W-20
ENEOS 5W-20 Premium Synthetic Motor Oil provides enhanced fuel saving characteristics. It offers an upgrade from conventional 5W-20 and satisfy drivers who seek improved fuel economy. ENEOS 5W-20 exceeds API Service SM, SL, SJ and SH, as well as exceeding ILSAC GF-4/GF-3/GF-2 for API Certified Gasoline Engine Oils. ENEOS 5W-20 exceeds the service fill requirements of Toyota, Honda, and other OE manufactures where an SAE 5W-20 motor oil is specified. ENEOS 5W-20 is recommended to be used in vehicles where SAE 5W-20 is required by manufactures.
SPECIAL FEATURES
- Excellent Engine Cleanliness and Wear Resistance
ENEOS Motor Oil 5W20's excellent engine cleanliness and wear resistance have been proven in official laboratory tests in the United States. This performance has also been confirmed in a full range of vehicle tests.
- Minimized Oil Consumption
The consumption of motor oils depends largely on the type of base oil. Because ENEOS Motor Oil 5W20 is blended from high-performance base oils, it has minimized oil consumption when compared to a 5W30, so users can look forward to adding lessoil to their engines.
- Meets Latest API Standards
The high-performance ENEOS Motor Oil 5W20 has been certified as meeting the latest API SM standard established by the American Petroleum Institute.
CONTAINERS
1USQ bottle
Typical Properties of ENEOS Motor Oil Eco Touring
| Quality grade
|
API SM
|
| SAE viscosity grade
|
5W-20
|
| Appearance
|
Orange
|
| Density (15°C), g/cm3
|
0.849
|
| Flash point (COC), °C
|
230
|
| Kinematic viscosity
|
|
| (40°C), mm2/s
|
43.0
|
| (100°C), mm2/s
|
8.5
|
| Viscosity index
|
161
|
| Pour point, °C
|
-45.0
|
| TAN, mgKOH/g
|
0.2
|
| TBN (HCl), mgKOH/g
|
8.5
|
| Color (ASTM)
|
L3.0
|
Note: The typical properties may be changed without notice. (August 2009)
Follow these precautions when handling this product:
| Handling Precautions |
Draining oil from a hot transmission can cause burns. Drain oil only after the transmission has cooled.
Inflammation can occur if oil enters the eyes. When handling this oil, wear protective goggles or take other measures to prevent eye contact.
Inflammation can occur if oil comes into contact with skin. When handling this oil, wear protective gloves or take other measures to prevent skin contact.
Do not drink this oil. (Swallowing this oil can cause diarrhea and nausea.)
Keep out of reach of children.
Read the Material Safety Data Sheet (MSDS) for this product before using the product. Obtain the Material Safety Data Sheet from where you purchased the product.
|
| First Aid |
In case of eye contact, rinse eyes thoroughly with clean water and consult with a physician.
In case of skin contact, wash skin thoroughly with soap and water.
If this oil is swallowed, do not induce vomiting. Consult with a physician immediately.
|
| Disposal of Used Oil and Containers |
Do not apply pressure to empty containers. The containers may burst if pressure is applied.
Do not weld, heat, drill, or cut the containers. The remaining oil may ignite and the containers may explode.
Follow all applicable laws and regulations when disposing of used oil or containers. If you are unsure of the proper disposal methods, consult first with the seller of the oil.
|
| Storage Method |
Seal the container tightly after use in order to prevent dirt, moisture, etc., from entering the oil. Store in a dark location. Avoid direct sunlight.
|
| PL-5 |
AUT-0050-041
|
Manufacturer: Eneos
Manufacturer Part #: 5W-20
|
|
|